Circle Green range

Sustainability needs availability

A sustainable material is only a tangible solution if it can also be reliably delivered. That’s why we offer Outokumpu Circle Green® in three different delivery forms – individually tailored to your needs.

  • Ex-stock: Immediately available, starting from a single sheet
  • From the Service Center: Ready for delivery in 3–4 weeks
  • From new production: Larger quantities, wider selection – available in 2–3 month

With this three-stage model, we combine maximum sustainability with flexibility in procurement and project planning.

Circle Green® - now available from stock in Switzerland for the first time

For the first time, Outokumpu Circle Green® is available from our warehouse in Switzerland. We offer the 4N surface (wet ground) in various formats, which means the material is immediately available without long waiting times. Our customers benefit from flexible quantities – starting from a single sheet.

Available sheets ex-stock

Delivery time: Within 24 hours
Minimum quantity: 1 sheet

Sheets ground on one side 4N, material: 1.4301/1.4307

Material

Surface

Format

Thickness 

1.4301 / 1.4307 4N

2500 x 1250 mm
3000 x 1250 mm
3000 x 1500 mm
4000 x 1500 mm

1 mm
1.4301/1.4307 4N 2000 x 1000 mm
2500 x 1250 mm
3000 x 1000 mm
3000 x 1250 mm
3000 x 1500 mm
4000 x 1000 mm
4000 x 1250 mm
4000 x 1500 mm
1.5 mm
1.4301/1.4307 4N 3000 x 1500 mm
4000 x 1500 mm
2 mm

 

Sheets available from the Service Center

We offer the following alloys from the Outokumpu Service Center. 

Delivery time: 3–4 weeks
Minimum quantity:
Approx. 1 tonne, may vary depending on thickness

Material

Surface

Width

Thickness 

1.4301 / 1.4307 2B, dry ground

1500 mm

1 mm
1.5 mm
2 mm
3 mm
4 mm
5 mm
6 mm
1.4404 2B, dry ground 1500 mm 2 mm
3 mm
4 mm
1.4509 2B, dry ground 1500 mm 1.5 mm
2 mm

Delivery options from new production

We can offer additional alloys from new production, in the form of sheet metal, coils or slit strip.

Delivery time: 2–3 months
Minimum quantity: Approx. 17–24 tonnes (varies depending on width)
Available as: 

  • Sheets in panels
  • Coils
  • Slit strip from approx. 120 mm – 1500 mm

Material

Surface

Width

Thickness

Outokumpu Moda

(ferritic, for low corrosive environments – PRE* < 17)

1.4016 2B

1250 mm
1500 mm

0.50–3.00 mm
0.80–3.00 mm

1.4003 1D 1250 mm
1500 mm

3.00–6.00 mm
3.50–6.00 mm

1.4003 1E / 2E 1250 mm
1500 mm
1.20–3.00 mm
1.4034 2R 1250 mm
1500 mm
0.80–3.50 mm
1.4512 1E 1000 mm
1250 mm
1500 mm
4.50–5.00 mm
1.4512 2B 1000 mm
1250 mm
1500 mm
0.50–3.00 mm

Outokumpu Core

(austenitic + ferritic, for moderately corrosive environments – PRE* 17–22)

1.4301

1D 1000 mm
1250 mm
1500 mm
3.00–8.00 mm

1.4301

2B

1000 mm
1250 mm
1500 mm

0.40–6.00 mm

1.4301

2R

1000 mm
1250 mm
1500 mm

0.40–3.50 mm

1.4509

1D

1500 mm

6.00–8.00 mm

1.4509

2B

1250 mm
1500 mm

0.80–3.00 mm

1.4509

2R

1250 mm
1500 mm

0.30–1.50 mm

Outokumpu Supra

(high-alloy austenitic steels, PRE* 22–26 – for highly corrosive environments)

1.4404

1D

1000 mm
1250 mm
1500 mm

3.00–8.00 mm

1.4404

2B

1000 mm
1250 mm
1500 mm

0.40–6.00 mm

1.4404

2R

1000 mm
1250 mm
1500 mm

0.40–3.50 mm

1.4419

2R

1250 mm

0.50–3.50 mm

1.4162 (lean duplex)

2R

1250 mm
1500 mm

0.40–3.00 mm

*The PRE value (Pitting Resistance Equivalent) describes the resistance of a stainless steel to pitting corrosion and increases
with the content of chromium, molybdenum and nitrogen.

Surfaces
2B   Cold-rolled, heat-treated, pickled, dressed
1D   Hot-rolled, heat-treated, pickled
1E   Hot-rolled, heat-treated, mechanically descaled
2E   Cold-rolled, heat-treated, mechanically descaled
2R   Cold-rolled, bright-annealed

Other alloys and dimensions available on request.

Start your project with Circle Green® – we’re there for you

Whether sampling, series requirements or ESG-relevant procurement: our experienced sales team is there to help you in person – by phone or directly on site by our Area Sales Managers. Together, we will find the right form of delivery – and show you how you can specifically verify the CO₂ effect of your project.

We combine sustainable materials with concrete figures – resilient, verifiable, ready for use.

Let our team advise you, or you can start straight away with a material enquiry.

  • Request advice – by phone or in person on site
  • Enquire about the CO₂ value and availability for your desired grade

Product carbon footprint

Find out more

Purchasing checklist

Find out more

Frequently asked questions

Find out more
Corporate Crest Image

To our 
full sheet metal range

Find out more
To provide you with the best possible service on our website we use cookies. Learn more about cookie usage